Contact Us
Wuxi Jinye Complete Set of Equipment Co.,Ltd
Add: Wuxi City, Jiangsu Province, Umemura Industrial Park Road 9 Zhang Road
Contact: Yan Yanjun
Tel: +86-510-81819377
Mob: +86-18951513765
Fax: +86-510-88159195
E-mail: sales3@wuxijinyemachine.com
sales@wx-jyjx.com
Home > Knowledge > Content
Whether the slitter can be combined with the slitting machine and its blade material
Dec 04, 2018

Slitting machine This machine is a common and commonly used equipment in machining. It is mainly used for shearing materials and obtaining the required size by slitting for direct use or subsequent processing. The following is to understand the slitting machine in depth to achieve the above purpose.

 

1. Is the blade of the slitter and the slitter the same?

The blade of the slitter is mainly used for stripping metal sheets and strips, etc., generally using SKD high-speed cutting tool steel, SKH and tungsten steel, and vacuum heat treatment to obtain uniform hardness. Therefore, in the material, the slitter and the slitter blade can be the same, and the same material can be cut. However, in other aspects, the slitter and the slitter blade still have some differences.

 

2. Can the slitter be combined with the slitter?

Slitting machine and slitting machine, these two devices can be combined to obtain a new device of slitting slitter, which has the functions of slitting machine and the function of slitting machine. In the process flow, It is for unwinding (unwinding)—feeding positioning—slitting slitting—winding (winding), which is to cut a wide roll of material into a narrow size according to the set size direction, so as to carry out subsequent processing, etc. operating.

 

3. Can the LD material be used on the slitter blade?

The LD material is 7Cr7Mo2V2Si. From a professional point of view, this is a cold heading die steel with high hardness but not very good red hardness. However, the slitting machine blade requires a relatively high running speed. If it is used for a long time, the blade may be annealed. Therefore, based on this, this material is not suitable for use on the slitter blade. It is recommended to use Cr12mov1 instead. In order to have a good cut and use effect.

 

4. Will the slitter be used in the processing of the aluminum strip?

The processing of the aluminum strip, specifically, the raw material is aluminum rolled or rolled aluminum coil, hot rolled aluminum coil, and then rolled into a thin aluminum coil of different thickness and width by a cold rolling mill, and then through the slitting The longitudinal slitting of the machine makes it an aluminum strip of different widths. Therefore, it can be concluded from the above description that a slitting machine is used in the processing of the aluminum strip.www.wxjymachine.com


Previous: Aspects of the main operation and use of the slitting steel plate slitting machine

Next: Flat steel production line SOP meaning and flat steel cold rolling mill production line