Contact Us
Wuxi Jinye Complete Set of Equipment Co.,Ltd
Add: Wuxi City, Jiangsu Province, Umemura Industrial Park Road 9 Zhang Road
Contact: Yan Yanjun
Tel: +86-510-81819377
Mob: +86-18951513765
Fax: +86-510-88159195
E-mail: sales3@wuxijinyemachine.com
sales@wx-jyjx.com
Home > Knowledge > Content
Aspects of the main operation and use of the slitting steel plate slitting machine
Dec 05, 2018

The slitting steel plate slitting machine is a specific type of slitting slitting machine, and is mainly used for longitudinal slitting and striping operation of the steel plate, so that the steel plate has a good processing effect for subsequent processing or direct use. Therefore, based on this, the next step is to carry out the learning work of the slitting steel plate slitting machine, and the learning contents are as follows.

 

1. What are the main operations of the slitting steel strip slitting machine?

The main operation of the slitting steel plate slitting machine in the process of use is the work of unwinding, leveling, sizing, slitting and winding. Therefore, it is necessary to pay attention to these work and take it seriously. And the standard operation uses the slitting steel plate slitting machine, and at the same time, the equipment has good use effect and achieves the purpose of use.

 

2. Is there a difference in the structural composition between the slitting slitter and the slitting steel slitting machine?

Slitting slitting machine and slitting steel plate slitting machine, from the professional point of view, they are not much different in structure, if any, there are differences in the subtleties, because in the scope of use, slitting and slitting The machine is much wider than the slitting steel plate slitting machine. The slitting steel plate slitting machine is for the steel plate material, not for other materials. In addition, in terms of structure, there are upper and lower cutter shafts, fixed arches, activity arches, and synchronous lifting.

 

3. What aspects should be paid attention to during the use of slitting steel strip slitting machine?

In the course of using the slitting steel plate slitting machine, the aspects that need attention are:

 

(1) When the tool holder of the device is in operation, the bearing temperature of the tool shaft will increase, causing thermal expansion of the tool shaft to cause a change in the amount of clearance. Therefore, thermal expansion should be considered when designing and manufacturing the tool holder. The problem is that the relative difference between the upper and lower shafts should not exceed 5 microns during the assembly process.

(2) During the operation of the slitting steel strip slitter, it is necessary to control the axial and radial directions of the cutter shaft, mainly to pay attention to whether it is within the allowable range and whether there is jitter or the like. In the inner diameter of the tool, it should be controlled within the range of 0.01-0.015mm.

(3) The upper cutter shaft of the slitting steel strip slitter should pay attention to the movement, because the shoulder position as the reference plane of the cutter is likely to occur after the operation due to wear of the components. It must change, so you need to consider this in the design process, and if necessary, take some measures to avoid problems.www.wxjymachine.com


Previous: Whether the purchase of high-speed leveling and shearing line products is important and the winding material loading process

Next: Whether the slitter can be combined with the slitting machine and its blade material