Contact Us
Wuxi Jinye Complete Set of Equipment Co.,Ltd
Add: Wuxi City, Jiangsu Province, Umemura Industrial Park Road 9 Zhang Road
Contact: Yan Yanjun
Tel: +86-510-81819377
Mob: +86-18951513765
Fax: +86-510-88159195
E-mail: sales3@wuxijinyemachine.com
sales@wx-jyjx.com
Roofing, Silo Or Culvert Corrugated Profile Roll Forming Line

Roofing, Silo Or Culvert Corrugated Profile Roll Forming Line

CORRUGATED SINUS WAVE PROFILE MAKING LINE COMPOSITION OF CORRUGATED PROFILE FORMING LINE Composed of manual decoiler, transmission roll table, culvert profile roll forming machine, stop transverse punching, servo longitudinal punching, cutting, output rack, hydraulic system, electric control...

CORRUGATED SINUS WAVE PROFILE MAKING LINE

2.jpg

COMPOSITION OF CORRUGATED PROFILE FORMING LINE

Composed of manual decoiler, transmission roll table, culvert profile roll forming machine, stop transverse punching, servo longitudinal punching, cutting, output rack, hydraulic system, electric control system.

PROCESS OF CORRUGATED PANEL MAKING:

Put steel coil onto decoiler, side guide, roll forming, transverse punching, longitudinal servo punching, cutting, output

 1.jpg

PARAMETERS OF CORRUGATED PANEL FORMING:

4.jpg

5.jpg

The incoming sheet: max 1200mm wide x 1.8-3.3mm thick, yield strength ≤300MPa

Roll forming speed: max 15m/min

Number of forming stations:20

Power of main motor: 45KW

Machine structure: portal stands, gearboxes transmission

Power of hydraulic station: 15KW with energy accumulator

Hydraulic systematic pressure: 25Mpa

Material of rollers: CGr15 bearing steel with hardening treatment.

Material of roller shafts: 45# steel finely machined with hardening & tempering treatment. Shaft diameter: φ140mm

Holes punching: stop the machine and punch all the holes on the same transverse line by one punching mould, in longitudinal direction each time servo punch one hole.

Cutting: after roll forming by blade moulds( cutting before forming is optional)

Material of punching moulds, cutting blades: Cr12MoV hardening treatment.

Electric control system: computer, PLC, frequency control.

 

Culvert Panel Arc Bending Machine

6.jpg

Machine dimensions: 2000*1200*1900mm

Drive motor: 5.5KW controlled by frequency converter

The up-down moving of top roller: 2.2KW cycloid motor and worm & worm gear, controlled by rotary encoder( can bear 5T load)

Double lines chain drive transmission

Rollers material: GCr15 hardening heat treated.

Rollers: three rollers (one top and two bottom rollers) to bend panel

Thickness of culvert corrugated panel: 2-3mm

Machine working: the arc radius of corrugated panel bending is set on PLC, then automatically adjust the height of top roller, corrugated panel go to-and-fro through the one over two rollers to get the desired bending arc.


Hot Tags: roofing, silo or culvert corrugated profile roll forming line, China, manufacturers, suppliers, factory, price
Inquiry